School Cane - BDSM Workshop

This is really too easy to make.

Instructions:

Step 1.

Take your cane and cut the thinner end about ? an inch (about 13mm) on from a joint. Use the sand paper to take off any roughness left by the saw. Now give each and every joint a nice sanding to remove any little sharp bits. Wipe away any sawdust with the lint free cloth. In the thicker end drill a small hole. Thread the leather lace through this and knot it to form a small loop, this is for hanging it up and to give it a 'made' look rather than an 'I just picked this up in B&Q;' look :)