Rope Strap-On - bondage tutorial
articles and tutorials Basic Bondage How to tie a crotchrope
Here’s a fun way to make a comfy but rock-solid strap-on harness using rope and your favorite vibrator. This harness enables the woman wearing it to enjoy herself at the same time she’s pleasing/impaling her partner. You’ll be surprised—it keeps the vibe so secure you could hang a towel on it. Alternatively, you can insert the vibrator tip-down and use this harness as a way to apply hands-free constant and adjustable pleasure to your partner.
Rope length: 15 to 25 feet
Rope diameter: 1/8 inch to 7/16 inch
Start by making three overhand knots about 6 to 10 inches from the end of a bight in the middle of the rope. Space the knots a little less than the diameter of the vibrator.
Insert the vibrator tip through the first opening between the knots nearest the end of the bight.
Insert the vibrator through the next opening between the knots.
Slide the knots down to the hilt of the vibrator. If your knots are close enough together, the vibrator will stay secure.
Position the vibrator (with the two knots facing up) under the crotch at the desired angle.
Pull the bight up the rear like a thong.
Pass the ends of the rope through the bight…
and bring the ends around to the front. Pull them under the ropes that went around the other side…
and double back the ropes to make a T shape.
Bring the ropes back around the hips in the opposite direction from which they came.
Just as with rope corsetry, thread the ropes down and through the loop created when the ropes doubled back.
Pull the ropes back around the hips in the opposite direction. Keeping the ropes parallel atop the previous layer, bring them around to the front on the other side.
Again, thread the ropes down and through the loop created when the ropes doubled back. Then pull the ropes back around the hips the opposite way.
Repeat this doubling back, corsetry technique until you are nearly at the ends of your ropes.
Tie off the corset/harness by doubling back a final time and threading the ends of the ropes under the top layer of ropes…
then up through the loop that opened when you doubled back.
Tie off this overhand knot and tuck the ends behind the front of the corset.
The rope corsetry technique gives your strap-on vibrator considerably more class.
The back of the Strap-On looks like a combination thong and corset. Keep all layers of ropes around the back flat and together.
Then get down to the business at hand!
