Spread-eagled bondage | tutorials for beginners
articles and tutorials Bondage tutorials for beginners Bondage positions list
For tying your sub with spread limbs, for instance, when you tie your sub standing, or spread-eagled, you could use the following knots:
For tying vertically, or when you don’t need tightening the ropes after binding, you could use a French bowline on the wrist or ankle, and a buntline hitch for securing the other end to some object.
Caution: these, as most knots, cannot be untied while under tension. You must have a way for unloading (taking your sub’s weight from) them for unbinding...
For tying spread-eagled on a bed, or the like, or any time you want to tense the rope after binding, use the French bowline on the limb, and, after passing the rope around the object, use a prusik over the length of rope tied to your sub’s limb.
Tying non tighten knot.
If you don't plan using too much tension (you will have just one loop around the limb) you could use a cuff based on the prusik.
It is faster to make...
...and faster too tighten.
After positioning and when under tension, it will not tighten further around the limb, and as you need both hands for loosening it, it is going to be very difficult for the sub to get free.
