Rope Breast Harness, pictures and techniques
articles and tutorials bondage techniques Harnesses, breast bondage tutorial
 Wrap the rope around the front of the body, over the breasts. |
 Wrap around to the back, and run the ends through the loop |
 Wrap in the reverse direction, then run the ends through the loop again and reverse direction again. |
 When you have three double strands of wraps, secure the ends with a half hitch, like you did for the lower harness. |
 Separate the two ends, and lead them over the shoulders. |
 Here is the view from the front. |
 Run the rope ends under the upper set of wraps. |
 Loop the rope ends around the upper wraps, so that the ends go in between the ropes from the shoulders. |
 Pull the ropes taut. |
 Run the rope ends under the lower wraps. |
 Loop the rope ends around the lower wraps and pull taut, just as you did with the upper wraps. |
 Take the rope ends, and feed them under the upper wraps from the bottom. Pull the ends down. |
 Feed the ends under the lower wraps from the bottom. Pull on the ropes, pulling the upper and lower wraps together. This gently squeezes the breasts, supporting them and making them more sensitive. |
 Continue looping the rope between the upper and lower wraps until you run out of rope. Run the ends under the ropes from the shoulders, and finish them off with a square knot. The finished product looks like this. |
